
HOW-TO INSTRUCTIONS
CycleDok: Getting Started in 3 Simple Steps
STEP 1
Attach to Handlebars
Loosen the clamp screws and slide CycleDok onto your handlebars.
Use the included adapters if your bars are 25.4mm in diameter.
Tighten the screws securely—do not exceed 5N-m of torque to avoid over-tightening.


STEP 2
Adjust the Angle
Find your perfect angle and reach.
Loosen the spring-loaded handles, adjust the platform, then hand-tighten to lock it in place.
Pro tip: Pull the handles outward to rotate them—helpful in tight spots!
STEP 3
Fit Your Device
• Loosen the thumbscrews to widen or narrow the side wings.
• Slide the front/rear keepers to hold your device snugly.
For smaller devices, move the keepers closer in.


BONUS
Switch Orientation
• Want to switch your CycleDok from Right Handed orientation to Left Handed orientation?
• Twist the handle counter clockwise to remove it.
• Push the rod out and flip it around, then apply the handle clockwise on the other side.

To Get the Most Out of Your Ride
Use CycleDok with your favorite training app, movie, or playlist.
Want less glare or better visibility? Tilt the platform slightly upward and reposition the keepers for the best view while riding.